Claytex will exhibit at the ADAS & Autonomous Vehicle Technology Expo, California, this September.
ADAS & Autonomous Vehicle Technology Expo has become the leading expo on the subject in Europe and is now a permanent event in California each September. Simulation, testing, sensing, lidar, radar, chips, silicon, AI, hardware, software, global positioning and mapping are some of the technologies on show.
An end-to-end ADAS/AV ecosystem will be on display, with expert speakers from international OEMs, Tier 1 suppliers, research and development centres and innovative transportation startups.
Meet with Claytex at booth #416
We’ll be showcasing AVSandbox, our autonomous vehicle simulation solution. AVSandbox integrates an extremely accurate and detailed simulation environment with physics-based, advanced sensors and vehicle dynamics into the process of developing, verifying, and validating AV driving functions. Built upon rFpro, it tests your system against countless scenarios, diverse and challenging edge cases, as well as routine driving operations, providing valuable support in your journey to develop and validate AV safety.
Our simulation tools and services help you create a dynamic development and deployment infrastructure that unleashes the potential of AV and ADAS programmes. The power of AVSandbox, with its millimetre accurate digital twins, high fidelity vehicle dynamics and real-world, physics-based sensor modelling, brings you the precision, flexibility, and scope to test every conceivable parameter in fully deterministic, repeatable, and highly accurate scenarios – Helping to transform your vision from concept to commercialisation.
Presentation
Our Managing Director, Mike Dempsey, will present at the event:
Testing ADAS and AVs in a deterministic simulation environment
Synopsis: It’s essential that we can test our ADAS and AV systems on a wide range of scenarios covering nominal, critical and edge cases. This must be done in a deterministic simulation environment so that the same test can be run in repeatable manner with the only variable being the ADAS/AV controller behaviour. AVSandbox provides a deterministic and sensor realistic simulation environment that allows the ADAS/AV controller to be immersed into the virtual world and tested on a diverse range of scenarios to identify failure modes and focus the development effort to improve safety.
If you have any questions or would like to book a meeting with us during the event, please do not hesitate to contact us.
Telephone: +44 1926 885900 – +1 (704) 951-7461
Email: info@claytex.com; sales@claytex.com, info@avsandbox.com
